Product Search Information
You are here: / ACCESS POINTS
Product Details

NanoStationM5 Loco CPE AP Bridge w/ 13dBi Antenna & POE

Art.No.: LOCOM5
NanoStationM5 Loco CPE AP Bridge w/ 13dBi Antenna & POE
NanoStationM5 Loco CPE / AP/ Bridge w/integrated 13dBi Antenna UBIQUITI GUIDE, RANGES ETC

No ratings.
This item is not in stock and must be reordered.
81.60 $ incl. VAT, plus Shipping
(Weight: 1 kg)
NanoStationM5 Loco CPE AP Bridge w/ 13dBi Antenna & POE
  • Functions as a Wireless Access Point or Bridge. Includes Pole Mount hardware. Mount for window or wall sold separately.

  • Includes Power over Ethernet (POE) adapter.

  • Simple configuration through web-interface

AirMax MIMO 2x2 technology enables much faster data-throughput & higher bandwidth: 

Therefore these technologies enable high concentrations of VOIP, streaming media, IP cameras, IPTV. 

RANGE:  3-5 KM 

The Ultimate CPE for the Global WISP Community

Nanostation packs some phenomenal performance with a revolutionary design combining a hi-gain 4 antenna system, advanced radio architecture, and highly researched and developed firmware technology allowing throughput, stability, and capacity performance rivaling even the highest-end WiMax networks. 

Featuring Powerful AirOS Software and Linux SDK

NanoStation ships standard with the powerful and intuitive AirOS by Ubiquiti Networks. It also is supported by a Linux SDK to encourage open source development.

Reliable System Performance

NanoStation has been proven in extreme temperature and weather conditions. Additionally, it has advanced ESD/EMP immunity design to protect against common outdoor radio and ethernet failures and eliminate truck-rolls for carriers.

SYSTEM INFORMATION

Processor Specs Atheros MIPS 4KC, 180MHz
Memory Information 16MB SDRAM, 4MB Flash

Networking Interface

1 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface

REGULATORY / COMPLIANCE INFORMATION

Wireless Approvals FCC Part 15.247, IC RS210, CE
RoHS Compliance YES
 

RADIO OPERATING FREQUENCY 5.475 - 5.825 GHz

TX SPECIFICATIONS

 

RX SPECIFICATIONS

  DataRate TX Power Tolerance   DataRate Sensitivity Tolerance
   
802.11a OFDM

 

6Mbps 22 dBm +/-1dB 802.11g OFDM

 

6Mbps -93 dBm +/-1.5dB
9Mbps 22 dBm +/-1dB 9Mbps -92 dBm +/-1.5dB
12Mbps 22 dBm +/-1dB 12Mbps -90 dBm +/-1.5dB
18Mbps 22 dBm +/-1dB 18Mbps -89 dBm +/-1.5dB
24Mbps 22 dBm +/-1dB 24Mbps -87 dBm +/-1.5dB
36Mbps 20 dBm +/-1dB 36Mbps -82 dBm +/-1.5dB
48Mbps 19 dBm +/-1dB 48Mbps -76 dBm +/-1.5dB
54Mbps 17 dBm +/-1dB 54Mbps -73 dBm +/-1.5dB

ADJUSTABLE CHANNEL SIZE SUPPORT

5MHz 10MHz 20MHz 40MHz
 

RANGE PERFORMANCE

Outdoor (BaseStation Antenna Dependent): Over 5km
 

ANTENNA

Gain 13dBi   Surival Wind 185 km/hr
Polarization Multi-Polarized VSWR 1.4:1
Polarization Selection Software Controlled Front to Back Ratio 30dB+
3dB Beamwidth Azimuth 45 degrees  3dB Beamwidth Elevation 45 degrees
 

PHYSICAL / ELECTRICAL / ENVIRONMENTAL

Enclosure Size 16.3 cm x 3.1 cm x 8cm
Weight 0.18kg
Enclosure Characteristics Outdoor UV Stabalized Plastic
Mounting Kit Pole Mounting Kit included. Mount for window or wall sold separately.
Max Power Consumption 4 Watts
Power Supply 12V, 1A (12 Watts). Supply and POE injector included
Power Method Passive Power over Ethernet (POE): Pairs 4,5+; 7,8 return - included
Operating Temperature -20C to +70C
Operating Humidity 5 to 95% Condensing
Shock and Vibration ETSI300-019-1.4
 

SOFTWARE

 AirOS

Tags [!] Price Alert

We are happy to inform you about a price change of this product respectively when it hits the price you want to purchase.

Verification code: $
Write Product Review
You have to be logged in to write a review.
No review available for this item.
Current product NanoStationM5 Loco CPE AP Bridge w/ 13dBi Antenna & POE NanoStationM5 Loco CPE AP Bridge...
Art.No.: LOCOM5  
NanoStationM5 Loco CPE / AP/ Bridge w/integrated 13dBi Antenna UBIQUITI GUIDE, RANGES ETC
81.60 $*